Wet Only Starter Pack for opening a dry cleaner
An equipment line for a new dry cleaner: washer, dryer, ironing and bagging, with a lower investment and BÜFA Care 4.0 wet cleaning only.
Why this pack
A modern dry cleaner, without a heavy investment
For a new shop, or for anyone who wants wet cleaning from day one — not a full perc line.
Lower investment
The essential equipment a dry cleaner needs to open — not a full industrial line.
Wet only
Chemistry is BÜFA Care 4.0 only. There is no solvent machine in the pack.
A complete flow
Wash, dry, iron and bag — the garment leaves ready for the customer.
TARAX study
Space, utilities and training on the Care 4.0 process — part of the setup.
What a wet-only dry cleaner is
In a classic dry cleaner, part of the work uses solvent and part uses water. In wet only, the whole flow is water: sorting, a wash with controlled mechanical action, drying, ironing and bagging. The chemistry and process system is BÜFA Care 4.0.
TARAX recommends it when the shop is opening now and the volume covers everyday clothes, shirts, wool and delicates. If part of the volume still needs solvent, see the options for dry cleaners.
Why this line for the start
A small dry cleaner opens with a washer that spins hard, a dryer that follows the volume, a table that finishes the garment and a way to seal the bag. A tunnel, a second press and a perc machine stay off this line.
The LA-14 TP2 E (13/14 kg) and the SR-18 TP2 PLUS E (16.5/18.3 kg) work as a pair: the dryer takes the load that leaves the washer. The Varioline CR2 with the SG66 finishes the garment for one iron. The dosing pumps keep the dose steady, so the result does not change from one pair of hands to the next.
Washer LA-14 TP2 E · Dryer SR-18 TP2 PLUS E · Varioline CR2 table · SG66 steam generator · Dosing pumps
Times depend on the load and the program. The process asks for a drum of at least 60%, low mechanical action and a hard spin before the dryer. The target is about one hour from wash to finishing. The kW stay per machine in the table — the study ties them to the room.
The flow
From intake to the bag
Four steps and chemistry on one line. TARAX sets programs, dosing and finishing. The garment comes in sorted, leaves with a high spin, dries gently and finishes on the table. The bag is sealed in the shop.
01
Wash
Light or dark, drum at least 60%. The LA-14 TP2 E spins at G-factor 500.
02
Drying
The SR-18 TP2 PLUS E dries gently. Exhaust air is Ø 200 mm.
03
Ironing
The Varioline CR2 finishes the garment. The SG66 supplies the steam, for one iron.
04
Bag
The HP630 KST seals the delivery bag. The garment leaves the shop ready.
The equipment
What the Starter Pack includes
A fixed line for opening a shop: one washer, one dryer, one table with a steam generator, a bag sealer and dosing pumps. The figures come from the technical sheets. The study confirms the E / PLUS E version for your room.

LA-14 TP2 E
13/14 kg · 130 L · G-factor 500 · 9 kW heating.

SR-18 TP2 PLUS E
16.5/18.3 kg · 330 L · 18 kW electric heating.

Varioline CR2
Board 1,400 × 500 mm · suction and blowing · 0.95 kW.

SG66
2.2 kW · about 3 kg/h · one iron · 230 V.
HP630 KST
Bag sealer for the dry cleaner’s delivery bag.

Dosing pumps
Automatic dosing of Care 4.0 chemistry on every cycle.
| Role | Machine | Points from the technical sheet |
|---|---|---|
| Wash | Fagor LA-14 TP2 E | 13/14 kg · 130 L · G-factor 500 · 9 kW heating · 788 × 869 × 1,307 mm |
| Drying | Fagor SR-18 TP2 PLUS E | 16.5/18.3 kg · 330 L · electric 18 kW · exhaust Ø 200 mm · 785 × 1,125 × 1,694 mm |
| Ironing | VEIT Varioline CR2 | Board 1,400 × 500 mm · suction and blowing · 0.95 kW |
| Steam | VEIT SG66 | 2.2 kW · about 3 kg/h · one iron · 230 V · mounts on the table |
| Bag | HAWO HP630 KST | Bag sealer for the delivery bag |
| Dosing | Dosing pumps | Automatic dose of Polar, Carat, Citro and Protect Pro on every cycle |
Figures from the Fagor LA TP2, Fagor SR-18 TP2, VEIT Varioline CR2 and VEIT SG66 / 2366 sheets. The study confirms the E / PLUS E version and the utilities of your room.
Pack limits
What TARAX takes on and what you prepare
In the pack
- The equipment in the line, with no solvent machine.
- Space and utilities study.
- Care 4.0 programs, dosing setup and commissioning.
- Training: light/dark, the cycle and finishing.
Yours to prepare
- Room, water, drain and electrical board.
- Dryer exhaust Ø 200 mm and operating permits.
- A counter and a stock of bags and chemistry.
- A press, tunnel or spotting station — a second step, with a new study.
Guide
A two-page proposal you can keep
The line, how a garment moves, the chemistry and what stays out. It is not a price quote — the price follows the space study.
Chemistry
BÜFA Care 4.0 only, from day one
The stack is Ozerna Polar, Lizerna Carat, Lizerna Citro and Lizerna Protect Pro. Protect Pro replaces the former Lizerna Conditioner and is PFAS-free. TARAX sets the dose on the pumps and trains the light/dark sort.
BÜFA Care 4.0 only
Ozerna Polar, Lizerna Carat, Lizerna Citro and Lizerna Protect Pro. Sort light/dark only, drum at least 60%, target about one hour from wash to finishing.
FAQ
Frequently asked questions
Quote
Request the Wet Only Starter Pack
Tell us the space and the expected volume — we come back with the composition, utilities and Care 4.0 training.